November 18, 2013 · by
orbit · in
Advance Product Quality Planning,
APQP,
APQP as per TS 16949,
APQP formats,
APQP Procedure,
APQP Process,
Design Checklist Points,
Design Information Checklist Format,
First Part Approval,
first part approval process,
First Part Approval request Note,
FMEA,
FPPA CHECKLIST,
FPPA plan,
Material Flow Cost Accounting - MFCA,
MSA Study,
PFD,
PPAP,
Process Flow Chart,
PROCESS FLOW CHART CHECKLIST POINTS,
Process Flow Chart Checklist questions,
Process Flow Checks points,
Process Flow Diagram,
PROCESS MAPPING,
Product/Process Quality Checklist points,
Production floor plan checklist points,
QUALITY SYSTEM,
R & R Study,
TOOLING PRODUCTION – FLOOR PLAN CHECKLIST POINTS General Points: Does the floor plan identify all required process and inspection points? Have clearly marked areas for all material, tools, and equipment at each operation been considered? Has sufficient space been allocated for…
November 18, 2013 · by
orbit · in
Advance Product Quality Planning,
APQP,
APQP as per TS 16949,
APQP formats,
APQP Procedure,
APQP Process,
Design Checklist Points,
Design Information Checklist Format,
First Part Approval,
first part approval process,
FMEA,
Formats,
FPA Request Note,
FPPA CHECKLIST,
FPPA plan,
ISO / TS 16949,
ISO 9001-2015,
JPEG format,
MSA (Measurement System Analysis),
MSA Study,
NEW EQUIPMENT,
PDF formats,
PROCESS MAPPING,
Product/Process Quality Checklist points,
Quality Audit,
Quality of Product,
QUALITY SYSTEM,
TOOLING,
Word Document Format PRODUCT/PROCESS QUALITY CHECKLIST POINTS General Questions: Is the assistance of the customer’s quality assurance or product engineering activity needed to develop or concur to the control plan? Has the supplier identified who will be the quality liaison with the customer?…
November 15, 2013 · by
orbit · in
Customer feedback questionnaire,
Customer Requirement ISO TS 16949,
Customer satisfaction Assessment,
Customer satisfaction Form,
Customer Satisfaction Ratio,
Customer Specific Requirements Matrix,
EXCEL format,
Formats,
FPA Request Note,
FPPA CHECKLIST,
FPPA plan,
JPEG format,
MSA (Measurement System Analysis),
PDF formats,
Production Part Approval Process Customer Specific Requirements Matrix To understand the specific requirements matrix, let’s see what can be consider requirements that customer can demands? And what kinds of the customer demands or requirements are consider as specific. As on base of supplier’s previous…
November 2, 2013 · by
orbit · in
EXCEL format,
first part approval process,
First Part Approval request Note,
Formats,
FPA Request Note,
FPPA CHECKLIST,
FPPA plan,
ISO / TS 16949,
ISO 9001,
ISO 9001-2015,
ISO 9001:2008,
JPEG format,
PDF formats,
QUALITY SYSTEM,
Quality Tools,
Word Document Format First Part Approval (FPA) Request Note This request note are generates by purchase department to quality control / quality assurance department for first part approval. This request note need to ensure the quality of the product which is going to…
October 24, 2013 · by
orbit · in
Doc Audit Checklist,
Doc Audit Plan,
Document Audit,
EXCEL format,
Final Packaged Product Audit Plan,
Formats,
FPPA CHECKLIST,
FPPA plan,
ISO / TS 16949,
ISO 9001-2015,
JPEG format,
packing,
PDF formats,
Quality Audit,
QUALITY SYSTEM,
R & R Study,
RED BOOK,
RED BOOK MANUAL,
Word Document Format Doc Audit Plan Final Packaged product Audit Plan – FPPA Plan As we discussed on previous article for the final packaged product audit checklist that cover the requirement of audit and its parameters that need to check during audit…
Doc audit Checklist Final Packaged Product Audit – FPPA Checklist (Doc Audit) International Standards are focus on quality system of product but in case of the packing of product lake the instruction can possible the damage, defect or any other…
